Guided Drive-Replaces Festo DFM-20-80-P-A-GF 170845 for Automation System Industrial Equipment

Guided Drive-Replaces Festo DFM-20-80-P-A-GF 170845 for Automation System Industrial Equipment

Replacement Part Number: DFM-20-80-P-A-GF, DFM2080PAGF, 170845

Specification:
Stroke: 80 mm
Piston diameter: 20 mm
Operating mode, drive unit: Yoke
Cushioning: Elastic cushioning rings/plates at both ends
Mounting position: Optional
Guide: Plain-bearing guide
Design guidance:
Position detection: Via proximity switch
Operating pressure: 0.2 MPa...1 MPa / 2 bar...10 bar
Max. speed: 0.8 m/s
Mode of operation: Double-acting
Operating medium: Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium: Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class: CRC 1 - Low corrosion stress
LABS (PWIS) conformity: VDMA24364-B1/B2-L
Cleanroom class: Class 6 according to ISO 14644-1
Ambient temperature: -20 °C...80 °C
Impact energy in end positions: 0.2 Nm
Max. force Fy: 709.3 N
Max. force Fy static: 709.3 N
Max. force Fz: 709.3 N
Max. force Fz static: 709.3 N
Max. moment Mx: 20.57 Nm
Max. torque Mx static: 20.57 Nm
Max. moment My: 16.31 Nm
Max. torque My static: 16.31 Nm
Max. moment Mz: 16.31 Nm
Max. torque Mz static: 16.31 Nm
Max. permissible torque load Mx as a function of stroke: 3.04 Nm
Max. effective load dependent upon stroke at defined distance XS: 86 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke: 141 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke: 188 N
Alternative connections: See product drawing
Pneumatic connection: M5

Application:
This is an aftermarket Coalescer Cartridge designed to directly replace Festo DFM-20-80-P-A-GF. It is suitable for use in a wide range of automation systems and industrial equipments that requires the Facet DFM-20-80-P-A-GF Coalescer Cartridge specification.

Disclaimer:
This part is not manufactured by or affiliated with Festo. It is an independent aftermarket product.